Leso Smart Wireless WiFi Video Doorbell HD Security Camera with PIR Motion Detection Night Vision Two-Way Talk and Real-time Video Suitable 16GB Memory 3 Batteries

April 9, 2019 - Comment

Attention: 1.Make sure that your camera is connected to a 2.4GHz network, not a 5GHz network. 2.Keep the doorbell in range of the router. Thick or insulated doors can greatly reduce strength of your wifi signal even if your router is close by. 3.Please charge the device when receiving it. Low power will influence the

Buy Now! $34.99Amazon.com Price
(as of November 14, 2019 8:50 pm GMT+0000 - Details)

Attention:
1.Make sure that your camera is connected to a 2.4GHz network, not a 5GHz network.
2.Keep the doorbell in range of the router. Thick or insulated doors can greatly reduce strength of your wifi signal even if your router is close by.
3.Please charge the device when receiving it. Low power will influence the functions such as setup failure or delaying of pushing notifications to your phone.
4.Before using for the first time, please fully charge the battery, about 4 hours, you can check the charging status through APP.
5.In order to ensure that each of your functions is working properly, you can adjust the sensitivity of each function through the APP.
6.Don’t mute your phone. The doorbell is connected to the app through the sound wave.
7.The video doorbell is only compatible with our wireless chime, not compatible with traditional doorbell chimes.
8. If the connecting is not successful,please  press the “RESET” button on the back of the doorbell for 8-12 seconds, and then press the doorbell button , try again.
9.Any setup details, please refers to the user manual.
Tips:
1. Before installing the doorbell next to the door, please connect the doorbell with the phone near the router properly.
2. If the connecting is not successful,please  press the “RESET” button on the back of the doorbell for 8-12 seconds, and then press the doorbell button , try again.
3 If the App can not work fluently, shut down and reset the router, try to connect the doorbell with your phone again.